| SRT-4 Throttle Body | $390.00 | |
|---|---|---|
 Click for larger view |
Boomba throttle body comes as a kit including adaptor plate, 55 MM hose adaptor (for those that want to use it immediately with stock intake pipes), 70 MM hose adaptor and all mounting hardware. Throttle bodies are CNC machined of billet aluminum. Parts are available in natural aluminum red and black anodized finishes. Increasing diameter to 70 MM gives almost 65% increase in throttle cross section area. Replacing stock throttle body with our new 70 MM (even with stock pipes and turbo) will give you a few additional HPs and greatly improve engine response. Replacing stock throttle body with our 70 MM throttle body and replacing intake piping with larger diameter (70 MM) gives limitless possibilities of increasing engine power. All parts are manufactured to our legendary high quality standards and backed up by our warranty. NOTE: Non-US buyers please contact us before making a purchase. |
|
| SRT-4 Motor Mounts | $225.00 | |
|---|---|---|
 Click for larger view |
SRT-4 engine mounts are machined of lightweight, aircraft quality aluminum with solid polyurethane bushings. The polyurethane hardness is carefully chosen so the engine mounts do not transfer any excessive vibrations to the body but give you very solid feeling during acceleration. Engine mounts are direct replacement of the factory units and use the same hardware. You’ll be surprised how smooth your car accelerates with Boomba Engine Mounts. NOTE: Non-US buyers please contact us before making a purchase. |
|
| SRT-4 Transmission Mount | $129.00 | |
|---|---|---|
Click for larger view |
SRT-4 transmission mount is machined of lightweight, aircraft quality aluminum with solid polyurethane bushings. Transmission mount is direct replacement of the factory unit and use the same hardware. It is available in natural aluminum, red, and blue anodized finishes. NOTE: Non-US buyers please contact us before making a purchase. |
|
| SRT-4 Fuel Rail | $155.00 | |
|---|---|---|
 Click for larger view |
It is machined from solid billet aluminum. It directly replaces factory rail and accepts factory fuel line connection. Because of special internal design fuel is distributed symmetrically to all cylinders. Large internal bore allows better fuel flow to feed aftermarket fuel injectors. External cooling fins help keep fuel at lower temperature. Rail is designed in such way that it can be used on fuel systems with aftermarket FPR and return line. It can be accomplished with just removing end plugs and replacing them with AN-8 fittings (fittings not supplied). We also provide extra 1/8 NPT port which van be used for fuel pressure gages or NOS. It is available in natural aluminum, red, and black anodized finishes. NOTE: Non-US buyers please contact us before making a purchase. |
|
| SRT-4 Clutch Pivot Ball | $45.00 | |
|---|---|---|
 Click for larger view |
When you replace the clutch on your Neon SRT-4, we suggest replacing the Clutch Pivot Ball as well. The OEM nylon pivot ball assembly is known to wear down and degrade over the time. If you are looking to replace or just want peace of mind, this is exactly what you are looking for. Machined from top quality hardened tool steel, we heat treat it to ensure this will outlast anything in your transmission. Our Clutch Pivot Ball even has OEM fit, expect it to exceed all OEM standards though. NOTE: Non-US buyers please contact us before making a purchase. |
|
| SRT-4 Blow Off Valve | $124.00 | |
|---|---|---|
 Click for larger view |
Blow off valve for Dodge SRT-4 is a direct replacement of a factory unit. It’s a full and complete atmospheric BOV with 3 springs unlike some other cheap conversion plates. Three springs allow you to set boost pressure at 13 Psi, 16 Psi or 19 Psi. Valve is characterized by a quick response time, which prevents air surges in the intake manifold. NOTE: Non-US buyers please contact us before making a purchase. |
|
| SRT-4 Engine Mounts Bolts Set | $35.00 | |
|---|---|---|
 Click for larger view |
The set containes 5 bolts (class 12.9 - the strongest available) with hardened steel washers and a set of Allen wrenches. They are heat treated and have extremely tensile strengh. This set is to be used with Boomba SRT4 Upper and Lower Engine Mounts only. NOTE: Non-US buyers please contact us before making a purchase. |
|
| SRT-4 25 psi Spring for Blow Off Valve | $5.00 | |
|---|---|---|
 Click for larger view |
Optional spring for Boomba SRT-4 blow off valve for vehicles with boost level around 25Psi. NOTE: Non-US buyers please contact us before making a purchase. |
|
| SRT-4 Oil Cap | $39.00 |
|
|---|---|---|
 Click for larger view |
Dodge Neon SRT-4 CNC machined, billet aluminum oil cap. Available in red, black or natural finish. It is designed to easily replace the original oil cap. NOTE: Non-US buyers please contact us before making a purchase. |
|