EVO VIII-IX 75 MM throttle body is designed in such way that it will use stock EVO VIII-IX idle control and TPS. Throttle body has 88 MM bolt holes pattern (Mustang 5.0) and will fit all aftermarket intake manifolds designed for Mustang 5.0 throttle bodies. Our EVO VIII-IX 75 MM throttle body comes as a kit including stock manifold adaptor plate and 60 MM hose adaptor (for those that want to use it immediately with stock intake pipes). Kit also includes 75 MM hose adaptor and all mounting hardware. Throttle bodies are CNC machined out of billet aluminum. Parts are available in natural aluminum and black anodized finishes. Increasing diameter to 75 MM gives almost 56% increase in throttle cross section area over stock throttle body. Replacing stock throttle body with our new 75 MM (even with stock pipes and turbo) will give you a few additional HPs and greatly improve engine response. Replacing stock throttle body with our 75 MM throttle body and replacing intake piping with larger diameter (75 MM) gives limitless possibilities of increasing engine power. All parts are manufactured to our legendary high quality standards and backed up by our warranty.

NOTE: Non-US buyers please contact us before making a purchase.

Fuel Rail is specially designed for Mitsubishi Evo VII-IX. The rail is made of CNC machined aluminum. It is available in natural aluminum, red, blue or black anodized finish. The wider diameter of this rail allows bigger fuel amount to be supplied to the injectors, enhancing engine performance. The fuel rail has additional threaded port allowing installation of fuel pressure gauge. It is easy to install or to remove. It is designed to replace the original stock rail. The rail not only increases the performance but also upgrades the visual effect.

NOTE: Non-US buyers please contact us before making a purchase.

Boomba Motor Mounts are designed to gain better traction, improve acceleration and help wth smoother gear shifts. Boomba Motor Mounts kit replaces both front and rear engine torque damper. They are machined of lightweight, aircraft quality aluminum with solid, molded polyurethane bushings. The polyurethane hardness is carefully chosen so the engine mounts do not transfer any excessive vibrations to the body but significantly reduce engine movement during acceleration. The motor mounts are direct replacement of the factory units but weigh 50% less. All necessary hardware is included. Say good bye to the wheel hop and experience smooth acceleration with Boomba Motor Mounts.

NOTE: Non-US buyers please contact us before making a purchase.

Adaptor plate that will allow mounting of EVO VIII-IX 75 MM throttle body to aftermarket intake manifold with stock bolt pattern and 75 MM bore. Adaptor is CNC machined out of billet aluminum and is available in natural aluminum, red and black anodized finishes.

NOTE: Non-US buyers please contact us before making a purchase.

Adaptor plate that will allow mounting of EVO VIII-IX 75 MM throttle body to any aftermarket intake manifold. Adaptor is CNC machined out of billet aluminum and is available in natural aluminum finish. Adaptor requires welding to the manifold.

NOTE: Non-US buyers please contact us before making a purchase.

Adaptor plate that will allow mounting of EVO VIII-IX 75 MM throttle body to ported 65mm stock intake manifolds. Adaptor is CNC machined out of billet aluminum and is available in natural aluminum, red and black anodized finishes.

NOTE: Non-US buyers please contact us before making a purchase.

Adaptor kit that will allow mounting of EVO VIII-IX 75 MM throttle body to the aftermarket intake manifolds with Mustang 4.6 bolt pattern. Kit includes adaptor plate, gasket and all required hardware. Adaptor plate is CNC machined out of billet aluminum and is available in natural aluminum, red and black anodized finishes.

NOTE: Non-US buyers please contact us before making a purchase.

Adaptor kit that will allow mounting of EVO VIII-IX 75 MM throttle body to the aftermarket intake manifolds with Infiniti Q45 bolt pattern. Kit includes adaptor plate, gasket and all required hardware. Adaptor plate is CNC machined out of billet aluminum and is available in natural aluminum, red and black anodized finishes.

NOTE: Non-US buyers please contact us before making a purchase.

Adaptor kit that will allow mounting of EVO VIII-IX 75 MM throttle body to the aftermarket intake manifolds with extra large mounting flanges. Kit includes spacer plate, gasket and all required hardware. Adaptor plate is CNC machined out of billet aluminum and is available in natural aluminum finish.

NOTE: Non-US buyers please contact us before making a purchase.

Adaptor kit that will allow mounting of EVO VIII-IX 75 MM throttle body to Magnus V5 intake manifolds. Kit includes spacer plate, gasket and all required hardware. Adaptor plate is CNC machined out of billet aluminum and is available in natural aluminum finish. Drilling holes to larger diameter in the adaptor and the throttle body may be required.

NOTE: Non-US buyers please contact us before making a purchase.

Interchangeable bolt on housing allows using of EVO VIII-IX 75 MM throttle body with Mitsubishi Eclipse engines. Kit includes Eclipse throttle cable adaptor.Throttle body requires EVO VIII-IX TPS. Housing is CNC machined out of billet aluminum. Parts are available in natural aluminum, red and black anodized finishes.

NOTE: Non-US buyers please contact us before making a purchase.

A must for everyone building custom fuel system or using aftermarket fuel pressure regulators. It adapts standard EVO VIII-IX fuel rail inlet and outlet ports to AN-6 threaded female port. Kit contains one inlet and one outlet adaptor. Available in red, black or natural finish.

NOTE: Non-US buyers please contact us before making a purchase.

Super Performance Fuel Rail designed for Mitsubishi Evo VII-IX allows very high fuel flow. It is equipped with 3/8 NPT ports at both ends and 1/8 NPT gage port. It requires addition of aftermarket fuel pressure regulator. The rail is made of CNC machined aluminum. It is available in natural aluminum, red and blac anodized finishes.

NOTE: Non-US buyers please contact us before making a purchase.

Battery Holder is specially designed for Mitsubishi Evo VII-IX. The holder is made of CNC machined aluminum. It is available in natural aluminum, red, blue or black anodized finish. It is designed to easily replace the original battery tie down and improve the visual effect.

NOTE: Non-US buyers please contact us before making a purchase.

The TiAL adapter flange is specially designed for Mitsubishi Evo VII-IX. The flange is made of CNC machined aluminum and is available in natural aluminum finish. It is designed to easily replace the original blow off valve with a TiAL blow off valve.

NOTE: Non-US buyers please contact us before making a purchase.

For high-powered applications EXEDY offers Multi plate clutches. These are designed for hot street action as well as drag, road, and rally racing. All of multi plate clutches come with a lightweight chromoly steel flywheel, and the famous purple anodized forged aluminum clutch cover. Depending on the application, both strap drive and lug drive models are available. All have T5001 cerametallic friction materials for extreme heat resistance. The multi plate clutches are rated up to 800+ foot pounds of torque at the flywheel. And come with spring damper or solid discs depending on the application.

NOTE: Non-US buyers please contact us before making a purchase.

After spending long hours and thousands of dollars building that high powered engine, you need a quality clutch that can properly transfer that power into motion. Count on ACT clutches for quality, performance and affordability.

ACT recognizes that every driver and engine set-up is unique, so a variety of complete clutch kits and components are offered to match virtually any situation. ACT’s complete clutch kits include a pressure plate, disc, release bearing, and (in most cases) a pilot bearing and alignment tool.

NOTE: Non-US buyers please contact us before making a purchase.

Kelford Cams have been producing high quality racing camshafts since 1968 but it is only in the last seven years that we have been operating with ultra modern design systems and cnc grinding machinery. Kelford's new racing camshafts are among the best available anywhere in the world and are found in many record breaking race engines in all forms of motorsport, whether it be professional or amateur racing, they have the will to win and they will do their best to help customers win.

Kelford Cams range of high quality camshafts for Mitsubishi EVO 8, ground on a masterless Toyoda CNC camshaft grinder.

TX272 The Best 272 degree cam on the market.

NOTE: Non-US buyers please contact us before making a purchase.

Kelford Cams have been producing high quality racing camshafts since 1968 but it is only in the last seven years that we have been operating with ultra modern design systems and cnc grinding machinery. Kelford's new racing camshafts are among the best available anywhere in the world and are found in many record breaking race engines in all forms of motorsport, whether it be professional or amateur racing, they have the will to win and they will do their best to help customers win.

Kelford Cams world leaders in high performance Mitsubishi camshafts, now available for the EVO 9 MIVEC.

TX272 The Best 272 degree cam on the market.

NOTE: Non-US buyers please contact us before making a purchase.

The FP BLACK™ for the Mitsubishi Lancer Evolution 4-9 is the most fully evolved stock appearing variant we offer. It features an 82mm HTA™ compressor wheel with a flow rate of 68lb/min with our 84mm Flow Advancement Port™ compressor cover. The turbine side features a large 67mm turbine wheel.

The turbo comes standard with a 25psi wastegate actuator. This turbocharger will produce 500-600whp results readily on well prepared engines.

This turbo features a 12 month warranty. You must activate this warranty within 30 days of purchasing this turbocharger by returning the warranty card included with the turbocharger and a copy of your receipt if purchased from a supplier other than Forced Performance. Please contact us directly if you have any problems or questions regarding your turbocharger, disassembly of the turbocharger will void the warranty.

NOTE: Non-US buyers please contact us before making a purchase.

HPS - High Performance Street disc brake pads are world renowned for increasing stopping power on your street legal vehicle. Increasing the performance of your vehicles braking system is easy when you choose Hawk Performance’s HPS braking compound. This unique Ferro-Carbon formula was developed for street performance using the safety and quality of Aerospace and Motorsports severe-duty friction technology.

The High Performance Street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you’ll have a highly durable brake pad with less brake dust.

HPS Ferro-Compound Features:

• Increased stopping power
• High friction/torque hot or cold
• Gentle on rotors
• Extended pad life
• Low dust
• Virtually noise-free

NOTE: Non-US buyers please contact us before making a purchase.

HPS - High Performance Street disc brake pads are world renowned for increasing stopping power on your street legal vehicle. Increasing the performance of your vehicles braking system is easy when you choose Hawk Performance’s HPS braking compound. This unique Ferro-Carbon formula was developed for street performance using the safety and quality of Aerospace and Motorsports severe-duty friction technology.

The High Performance Street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you’ll have a highly durable brake pad with less brake dust.

HPS Ferro-Compound Features:

• Increased stopping power
• High friction/torque hot or cold
• Gentle on rotors
• Extended pad life
• Low dust
• Virtually noise-free

NOTE: Non-US buyers please contact us before making a purchase.

Excessive heat can cause resins in your brake pad to vaporize or "outgas." As the brake pad wears, the used friction material turns into a fine dust. This boundary layer of heat, gas and dust builds up between the pad and rotor surfaces and inhibits performance. Here's where Power Slot's slotted brake rotors make a big difference.

Power Slot's exclusive Vac-U-Slots are machined into the rotor and help evacuate gasses and dust, shed heat, and keep the brake pad surface clean. And in wet, raining conditions, our Vac-U-Slot helps push water off the braking surface for better stopping power. The Vac-U-Slot also serves as a visual wear indicator. The slot is machined to the rotor’s minimum thickness where it crosses the outside edge. If you cannot see the slot along the outside edge, the rotor has worn down to its discard depth. A combination of Hawk high performance brake pads and Power Slot slotted rotors will deliver superior, reliable braking for virtually all automotive, truck and SUV applications, even under hard driving and severe duty conditions.

NOTE: Non-US buyers please contact us before making a purchase.

Excessive heat can cause resins in your brake pad to vaporize or "outgas." As the brake pad wears, the used friction material turns into a fine dust. This boundary layer of heat, gas and dust builds up between the pad and rotor surfaces and inhibits performance. Here's where Power Slot's slotted brake rotors make a big difference.

Power Slot's exclusive Vac-U-Slots are machined into the rotor and help evacuate gasses and dust, shed heat, and keep the brake pad surface clean. And in wet, raining conditions, our Vac-U-Slot helps push water off the braking surface for better stopping power. The Vac-U-Slot also serves as a visual wear indicator. The slot is machined to the rotor’s minimum thickness where it crosses the outside edge. If you cannot see the slot along the outside edge, the rotor has worn down to its discard depth. A combination of Hawk high performance brake pads and Power Slot slotted rotors will deliver superior, reliable braking for virtually all automotive, truck and SUV applications, even under hard driving and severe duty conditions.

NOTE: Non-US buyers please contact us before making a purchase.

Excessive heat can cause resins in your brake pad to vaporize or "outgas." As the brake pad wears, the used friction material turns into a fine dust. This boundary layer of heat, gas and dust builds up between the pad and rotor surfaces and inhibits performance. Here's where Power Slot's slotted brake rotors make a big difference.

Power Slot's exclusive Vac-U-Slots are machined into the rotor and help evacuate gasses and dust, shed heat, and keep the brake pad surface clean. And in wet, raining conditions, our Vac-U-Slot helps push water off the braking surface for better stopping power. The Vac-U-Slot also serves as a visual wear indicator. The slot is machined to the rotor’s minimum thickness where it crosses the outside edge. If you cannot see the slot along the outside edge, the rotor has worn down to its discard depth. A combination of Hawk high performance brake pads and Power Slot slotted rotors will deliver superior, reliable braking for virtually all automotive, truck and SUV applications, even under hard driving and severe duty conditions.

NOTE: Non-US buyers please contact us before making a purchase.

Excessive heat can cause resins in your brake pad to vaporize or "outgas." As the brake pad wears, the used friction material turns into a fine dust. This boundary layer of heat, gas and dust builds up between the pad and rotor surfaces and inhibits performance. Here's where Power Slot's slotted brake rotors make a big difference.

Power Slot's exclusive Vac-U-Slots are machined into the rotor and help evacuate gasses and dust, shed heat, and keep the brake pad surface clean. And in wet, raining conditions, our Vac-U-Slot helps push water off the braking surface for better stopping power. The Vac-U-Slot also serves as a visual wear indicator. The slot is machined to the rotor’s minimum thickness where it crosses the outside edge. If you cannot see the slot along the outside edge, the rotor has worn down to its discard depth. A combination of Hawk high performance brake pads and Power Slot slotted rotors will deliver superior, reliable braking for virtually all automotive, truck and SUV applications, even under hard driving and severe duty conditions.

NOTE: Non-US buyers please contact us before making a purchase.

All Pro Series ARP2000 studs are centerless ground, heat treated prior to thread rolling and machining, and are nominally rated at 220,000 psi. These fasteners deliver a 35% increase in tensile strength over the OEM torque-to-yield (TTY) head bolts.

NOTE: Non-US buyers please contact us before making a purchase.

Gates kevlar reinforced timing belt for Mitsubishi VII-IX. 300% stronger with three times the heat resistance of stock belts.

NOTE: Non-US buyers please contact us before making a purchase.

The GrimmSpeed™ Mitsubishi EVO Boost Control Solenoid is designed to work with your factory computer (requires tuning). It will not reduce the life of your factory computer because it is designed to draw the same ammount of power as the factory BCS but flows better and reacts faster. It plugs in and requires no splicing or soldering of resistors. With the included bracket you can bolt it in, plug in the connector, and start tuning for fast boost response, increased boost pressure and free up lots of power. Planning on returning the car to stock? Just reverse installation.

NOTE: Non-US buyers please contact us before making a purchase.

The Aeromotive 340 Stealth Fuel Pump is a high-output, in-tank, electric fuel pump that fits most popular EFI applications. The Aeromotive 340 is a compact, lightweight pump that bolts into many existing hanger assemblies.

NOTE: Non-US buyers please contact us before making a purchase.

For use with 2 1/16” (52mm) Gauges

NOTE: Non-US buyers please contact us before making a purchase.

For use with 2 1/16” (52mm) Gauges

NOTE: Non-US buyers please contact us before making a purchase.

For use with 2 1/16” (52mm) Gauges

NOTE: Non-US buyers please contact us before making a purchase.

For use with 2 1/16” (52mm) Gauges

NOTE: Non-US buyers please contact us before making a purchase.